...Olds Cutlass Calais since it had 2 miles on it. I am the original owner. Usually if you have trouble with it going into Reverse, the next gear that you will have trouble with it going into is 1st. I ...
Question about 1993 Cutlass Ciera
master cylinder rusted and spraying fluid Oh mannn! It looks like I will have to remove all four brake line connections, then remove the MC unit to even get at this line. Should I order the parts from
Question about 1996 Cutlass Supreme Coupe
olds aurora back brake pad replacement, how to compress the pads to get the caliper back over the pads? Special tool is a 1" cube with tabs on each side that fits into indentations on the brake piston
...master cylinder and bleed ,then the right rear,then the left rear,and right front,then the left front wheel.You should not have to bleed the brakes to install brake liners. check the brake fluid I ...
...cutlass supreme and the guy that i got it from said that the brakes need to be bleed. I don't have the money to take it to the shop right now and i need to get them done asap. How can i do it myself. ...
...Olds Cutlass Supreme. I took it into a shop and the code said ABS motor was bad. Would be the cause of no brake fluid coming out when I take banjo fitting off? HelloThe ABS in this car is what is ...
...olds/cutlass ciera/3.8,6cyl how to trouble shoot my brakes ive already replaced my master cylinder and fraont brake pads. i was told to check th boostter. also check for the vacuum hose from the ...
...olds cutlass surpreme rear brakes do not work screwed in pistons- replaced pads rear brakes do not work car has "good pedal" what did I do wrong the brake system has an equaliser in the line to ...
...master cylinder itself, It should always push fluid. Does the car have ABS? It could also be inside the ABS module if it does. I am familiar with brake systems and diagnostics, just not familiar with ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions