Questions & Answers for: oil pan gasket replaced nissan

...oil pan is leaking around the corners. What do i do? drain out hte old oil, Remove oil pan bolts, remove old oil pan gasket, install new gasket, install oil pan, tighten oil pan bolts to 17 ft. lbs. ...

Ad

Question about 2003 Murano

2 Answers

...pan to remove the oil, you are only changing about half of it.(the remainder is inside the torque converter) If you change it multiple times,permitting it to idle, then changing shift positions, you ...

Ad

Where is the crankshaft position sensor for a 2007 Nissan murano? CRANKSHAFT SENSOR LOCATED ON THE OIL PAN FACING THE GEAR TEETH COGS OF THE SIGNAL PLATE.

Question about 1991 Stanza

1 Answer

...OIL PAN, REPLACE PAN GASKET, WHILE YOU REPLACING PAN GASKET REPLACE TRANSMISSION FILTER WHILE OIL PAN OFF.IF TRANSMISSION OIL PAN NOT LEAKING, CHECK TRANSMISSION OIL COOLER LINES GOING INTO RADIATOR ...

Question about 2012 Murano

2 Answers

...be under warranty still call the dealer first.... Get on your back, slide under front, look for a black pan, this is the oil pan, the oil pan has a 14mm head nut in the back end.
Answered ...

...right side manifold is visible when you look up from the upper oil pan area to the underside manifold, the crack is small in the front runner. it takes 2 to 3 hours to replace it thru wheel well

...oil pan gasket 2004 nissan xterra are you referring to the lower sub pan or main oil pan? the lower sub pan on most nissan engines are fairly easy to diy. just unbolt all the fastening bolts and you ...

...gasket on 2006 nissan murano water in oil, sputtering, blowing water out of tail pipes, dont no were to start to fix it Sounds like you need to find a mechanic. Changing a head gasket is not really ...

Upper oil pan gasket on a nissan maxima 2005 replacement here's a video. How To Install Replace Oil Pan Nissan Maxima Altima 3 5L

2004 nissan murano has light smoke coming up by the intake manifold near the firewall. I've replaced the valve cover and gasket. Probably oil residue burn off hopefully you didn't pinch the new gasket

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...