Questions & Answers for: normal gas burners click trying

...Gas company is coming Monday to but after i plugged it in I turn 1 of the burner knobs and they all started clicking, this actually happens no matter what knob I turn, is this normal? I was under the ...

...Gas can be heard flowing an ignition occurs and then burner goes out and the cycle starts over. this continues until set temperature is reached and from time to time while baking it will start to ...

gas manually. Please help Cecil [email protected] When you set a burner to light, all burners spark. This is normal. Move knob back off the spark position as soon as burner lights. All sparking will

...burners wont light if oven is lit first.Igniters click , smell gas , no flame. Sometimes will light if you turn to lowest heat setting. Burners light normally with oven off . Oven is more frequently ...

...normal She doesn't know what it means and does she need a match to light it or what? PLEASE HELP When a gas stove is clicking, it means it is trying to ignite the burner. If the knob is held in the ...

...gas control back a little and the igniters should stop. Hi, that's normal, stupid, but it's manufacturer design, what you have to do, when you turn knob clockwise to lit burner,after burner is lit, ...

...gas and not hearing ignition. You can check the ignitors/wiring by switching the output wires at the spark module. If the front ones work & back ones stop working, change out the module. If no ...

...Gas burners go "poof" when they have too much gas in the area upon lighting. This is normally due to the ignition source not being close enough to the initial source of gas. This is normaally ...

...gas valve manifold pressure setting may be too low. Normal manifold pressure is 3.5 inches water column on natural gas furnaces. ( 1 psig is equivalent to 28 inches water column). Pull and clean ...

...gas cooktop ignitor started clicking on its own at a rate slower than a normal start. Supply power checks good. Stove will start normally. Tried unplugging but no change. I had that problem also. It ...