...is color coded.the red battery cable the positive + cable goes on first connect it to positive battery post.then connect the black cable negative - cable to the negative post on battery. Red is
...(120) . Reverese application when battery is fully charged . Re-install battery in vehicle/ being sure to re-install as removed . Install black cable to battery (-) negative ...then Hot (red)
start it? Take jumper cables put the black cable to the negative post on the battery and the red cable to the positive post on the battery.Do the same to both cars Black to ground (-)and red to hot.(+
how to test the cooling fans ground the fan housing to the battery negative post and the fan's connecting hot wire to the battery's positive post to test
...my negative post and hooked it back up while the hot post was hooked up the alarm started going off. If you dont want the alarm to go off when you hook up the battery leave the driver door ...
Question about 1998 Lumina
...battery terminals for jump starting a 1998 Chevy Lumina? hi, it has side posts. You can use the other red post that connects to the fuse box...the cables split.. the 2 and 3 wires are hot and simply ...
Question about 2002 Liberty
...negative battery post the radiator fan tries to turn and I get a spark bad relay or bad logic in the BCM etc. first pull the relay. then find out if the relay coil is hot (socket voltage) if hot, the ...
...negative of the battery and then the positive post (for safety, always remove the negative first and reconnect negative last), clean both battery posts and the end of cables or the clamps that go on ...
Question about 2002 Liberty
...negative, all good. Use a digital multimeter across battery posts, everything off, the generic spec for a full charge is 12.6 volts. Leave meter leads touching battery posts, have helper turn key to ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions