Questions & Answers for: mount bolts ge microwave

...GE # WB01X10125 (or AP3185225 or 910236 as listed on some repair parts sites) When you removed it years ago, did you keep the rear mounting plate? It was affixed to the wall behind the microwave. It ...

bolts that mount the microwave to the cabinet above. Where can I find them? I have checked the internet with no luck. You may be looking for this Flathead 1/4 x 28 threaded bolt that is about 4" long.

...mount without the metal casing that the developers used with the old micro? If the OTR is the same model, the mounts should be the same. As long as you use the same bolts/screws from the old one, or ...

bolts that hold it to the cabinet above. This seems to be the standard for OTRs now. Thus my problem - I have no wall to mount the oven on - just the cabinet above. Any suggestions or does anyone know

...microwave cabinet mounting screw is WB01X10180 (or AP3205964 or 942461 as listed on some repair parts sites). A set of three is GE's p/n WB01X10125 (or AP3185225 or 910236 as listed on some repair ...

ge spacemaker xl1800 out. The mounting plate installs on the wall and two 4-6 inch bolts go through the cabinet above and into the top-front of the unit. The two top mounting holes are about 8 1/2 in.

What size of bolts are needed to mount a GE spacemaker microwave above my stove? 1/4 inch

...bolts for mounting the GE Spacesaver XL1800 microwave. open door to unit get model number and got o searspartsdirect.com and enter it in to get part number and prices...... or shop locally,, also ...

...into the micro mcdevito75 here, Best Bet bring the mounting bracket and bolts recieved with the unit to your local hardware store. they will give you the correct bolts need to mount undera

...GE Spacemaker models, there are two long horizontal bolts at the top (R&L corners), accessed behind the upper grill. Remove the grill (four tiny screws), take out the two bolts (flat screw heads) ...