Questions & Answers for: manually unlock door jeep cherokee

...you need to lube up your locks a lot. Use liberal amounts of lube and work it in while using the manual lock/unlock on the door. Keep it up until it's easy to move with the manual

Ad

Question about 2001 Grand Cherokee

2 Answers

...door open to be lock. Unlock and save the changes. It is also in your manual if you have them. The overhead driver guide and control should fix this problem .just consult your drivers manual .Good ...

Ad

Question about 1996 Grand Cherokee

1 Answer

...unlock when using the passenger side switch, then the switch itself is probably bad. If the passenger side switch locks or unlocks all the other doors except for its own, then the power lock solenoid ...

...wire or one about to break. Been there and done that. the driver door on my 2004 jeep grand cherokee laredo will not open from the outside even with the key. manual unlock switch seems to be ...

Question about 2001 Grand Cherokee

1 Answer

...manually or with the automatic door locker. I have checked the fuse and it is ok. The other four doors lock/unlock with the automatic lock. Can anyone please help me? the electronic sensor could be ...

...manually unlock it but it won't unlock automatically. It locks auotmatically. Sounds like the actuator went out. There normally run 40-60 for the part and does not take long to replace normally 30 ...

...manually lock/unlock with the key. Do I need to remove the door latch or is there a simpler solution? known problem replace the door latch/acuator. Probably a broken wire between body and door. Peel ...

door lock on my 2004 jeep grand cherokee will not unlock and cannot be opemed from the outside neither with key or by switch or interior manual switch. there is a sound when auto switch is activated. ...

with the remote or inside. I can manually unlock the each one by one but electronically am unable to do so with either driver or passenger door lock. Possible master switch or busted wire in door boot

manually re-lock the driver's side door and repeat steps 5 and 6 using each remote you would like to program and then continue. 5Turn the key to the "Off" position and turn the ignition on immediately

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...