...loose connection, solder joints are "connections" except that molten soldering lead is used to attach/connect the component to the board, "loose connection" in this sense is equal to "cold solder". ...
...loose connection, solder joints are "connections" except that molten soldering lead is used to attach/connect the component to the board, "loose connection" in this sense is equal to "cold solder". ...
...loose connection, solder joints are "connections" except that molten soldering lead is used to attach/connect the component to the board, "loose connection" in this sense is equal to "cold solder". ...
Question about J53-BW 5 in. Portable Television
...solder terminals to get loose. It is very difficult to detect the loose soldering; as thay may be microscopic in size. Just resolder most of the suspected solder terminals by applying a little more ...
Question about FD Trinitron WEGA KD-27FS170 TV
...loose solder points as some of them will be microscoppicaly small and can be seen with the help of a magnifying glass. Just do what we do at service table. Just resolder all the suspected solder ...
...loose solder terminal at that point, which is usually very difficult to get measure with a multimeter or even by normal sight. some of these loose solderings will be so microscopic that we cannot ...
...loose solder terminals at the vertical output section ot your TV. Just open the TV, locate the vertical output section. There is an IC in the vertical output section, usually screwed on to a metal ...
Question about KP-57WS500 57" Rear Projection Television
...loose solder points, becuse sometimes they will be too small to ***** eye. So do resolder most of the suspected solder points by applying a little more solder; without making any solder bridge ...
...loose solder terminals. Resolder all the suspected solder terminals, by applying a little more solder to each terminals. Check whether the 'Filament' of the CRT is glowing or not. If not, check all ...
loose solder terminals. Re-solder all the suspected solder terminals, by applying a little more solder to each of it. If you wish to get some details; check the site linked here. Viewing it in "Mosaic
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions