Questions & Answers for: loose doors kenmore microwave ovens

...loose conneciton on the control unit circuit board - bad magnetron or other high voltage part If you or a friend decide to look into it, we have critical safety information, info on door switch ...

Kenmore over the range Microwave 1000 watts - model 721.63653300 - serial # 409km00625 manufactured Sept.2004 Everything is working except the heat.Would appreciate your help. Generally, the most ...

Kenmore Navigator Microwave Everything is working, but there is no heat. I do not have a user guide because the microwave came with the unit and previous owner did not leave it. Generally, the most ...

Kenmore model 665.62612200, nothing works but keypad. checked fuse, works. keypad thinks the oven is cooking (counts down, etc.). no lights, fan, hood vent, etc. This is usually caused by either a bad

loose handle. How do I tighten the handle on a Kenmore under the cabinet microwave oven? Don To access the door screws on MOST microwave ovens, you need to remove the inner door panel that goes around

...loose door switch mount . There are plastic mounts inside the microwave which hold the door switches and onto which the door latches lock when you close the door. The screws on these mounts may be ...

after starting I get a F-9 on screen and everything stops. F9 code means either a bad door switch or a loose door switch mount

...loose keyboard connection or the keyboard itself is faulty. If you are not too familiar with electrical products, I would suggest calling a repairman because there is very high voltage inside a ...

Kenmore microwave model 721 loose door When I pull the handle to open the door the bottom comes apart a little. It doesn't come all the way off...yet so trying to fix it before it gets worse. Any ...

Kenmore Microwave 405.72123310 This is likely a problem with the upper or lower door switch or its mount is loose, misaligned, or broken. This is usually caused by opening the door while it's cooking