...light switch out and now it wont go back in the way it came.would this be the cause of me having no indicators.regards darren from australia Yes you have to have that hazard light switch (flasher) in ...
light from two differnt switchs 2 way switch is on/off one place only. I believe the question is referring to (at least in Australia) "2" way switching is with "2" switch mechanisms. Which seems to be
...someone qualified to fix it, for your own safety, and that of your family. Very seldom you will find a neutral wire within a light switch. Its normally just the live wire wired through a switch
...switch or the wiring as a problem. In Australia, the only Swift with a boot lid was a 1.3 or 1.6 Swift Sedan. The rest were all hatchbacks and never had brake lights in them. Some of the sedans had ...
...simple solution to this could be the wiring in australia they came with an extra loom to run the bike with out a key ignition switch, the previous owner may have changed them and not changed them ...
...switch is tripped). This happens even when the fan light is off.The fan is an older model (i don't know what brand) that was in the house when we bought it. The problem emerged after we had the fuse ...
Question about 2003 WR 250 F
...Wiring DiagramCar Radio Battery Constant 12v+ Wire: PinkCar Radio Accessory Switched 12v+ Wire: BlueCar Radio Ground Wire: GrayCar Radio Illumination Wire: Red/BlueCar Stereo Dimmer Wire: ...
...our Sorrento's do not have auto remote start . If this is an aftermarket fit then I strongly think it has been wired up wrong to the ignition switch or a fuse on it's wiring system has blown. ...
Question about 2003 WR 250 F
...switch light comes on when aircon not working. You have a broken, cut / chaffed wire shorting to ground. The Bantam is specific to Australia, and we are in North America. You need a good auto ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
