Questions & Answers for: lancer ignition key lock

ignition lock up. cannot turn key when inserted. Car is in park. key will not turn. wheel is stuck. tried locking and unlocking car door and retrying ignition, but did not work. Tried taking off ...

key doesnt move past ACC I have tried the exact same things on the exact same car... WOW. It could be the mechanical ignition switch or ignition lock cylinder maybe? To find out if it's the switch or ...

...key looks worn, have a duplicate made to see if this solves the problem. If the lock still sticks, the chances are that you need to replace the lock mechanism before it fails completely and you will ...

...ignition to on and unlock when I turn it back to off, just started today and unsure of why. How do I stop it from doing this? Mitsiubishi Lancer Cedia Wagon. usaully this is done by the keyfob when u ...

ignition key would not turn In most cases the key cylinder is defective, but try this 1st. Get a tube of dry lock cylinder lubricant (about $4) from the hardware store and spray it into the lock ...

...Lancer Not reset reprogram right. To do that follow the instructions below.1. Locate the Data Port under drivers side dashboard usually located to the right of steering column. 2. Insert keys in ...

lancer ignition key the ignition keys won't turn to the lock position so I can take keys out of the car make sure shifter all the way in park,turn steering wheel back and forth while turning key to ...

lancer and replace with older non immobiliser type ignition i think this would be an expensive excersise,try removing the fuse to the central locking , because if you change the immobiliser system you

How to remove ignition lock switch without a key? https://www.youtube.com/watch?v=tx-bcUdWfKw watch this video

How do I remove the ignition lock switch without a key on a 2002 Mitsubishi Lancer? https://www.youtube.com/watch?v=4PcBuOn7d6I