Questions & Answers for: kreepy krauly bottom pool

...kreepy? Partly open the valve to the bottom drain. If you have a jandy valve you can balance the skimmer and bottom drain. the more you open the bottom drain the less suction you have to the

...kreepy krauly wont stay flat on the bottom of the pool??? Do you have any hose weights fitted to the kreepy hose? If you do,take it off and see if it makes a difference.Is this happening while the ...

...kreepy krauly will not stay suctioned to the bottom of the pool. What can we do? Check for air leaks in your hoses, your pump or in the plumbing system. Also check for clogs in your pump impeller if ...

Kreepy Krauly In-Ground Pool Cleaner: my creepy crawler wont hammer... My creepy crawler wont hammer This usually happens when there is a small stick jambing in the bottom of the openning in the ...

...kreepy pipe or mouth You can look inside the cleaner to see if there is debris in there. If debris got past the pump basket you might have a clogged impeller limiting the suction. 1 other thing to ...

...Kreepy Krauly to stick. This is often a problem with this type of automatic pool cleaner. Also, check the return line water flow and adjust it if necessary. Hose balance could also cause it to stick ...

...of the skirt remaining on the bottom. I've adjusted weights and am at a loss. The Kreepy works fine in shallow water and on the sides of the pool. need less weight on vacuum hose in different ...

kreepy krauly stays in the deep end of the pool. I think I need to adjust the weights. Where should the weights be placed? The first weight from the cleaning head should be adjusted so the Kreepy sits

kreepy krauly just floats wont sink to bottom Kreepy kraulys usually come with a weight make sure you have it and its attached before launching into pool.

...Kreepy krauly' seal does not rest flat on the bottom on the pool, so it skips dirt is should remove. In additon, it seems to turn in only directdion--to the right, so it cleans the same areas ovger ...