Questions & Answers for: kerosene heater light stay lit

...kerosene heater for years in my garage without any problems. Then the 097061-01 solid state relay went out. I replaced it with new part number 107850-01. At the same time, I also figured I would ...

...kerosene heater (rmc-55-r7 ) The wick will not stay lit. Seems to be getting fuel. Also, where can I find a manuel wicks won't light for usually one of 2 reasons. water in the kerosene, which means a ...

...stay lit I have the heater that will burn on diesel or keroseen. When I turned it on this year it started but after a few minutes of running it quit and blew a big puff of smoke. I turned it off and ...

...heater and there is no kerosene coming out for it to light. I took the cover off and the fan is on and the spark plug is trying to light it. I was using it and it just quit. It was having a hard ...

...kerosene salomander style heater, Model #B160 serial #CKO789, plug in, turn on, set thermostat, fan comes on, 10-15 secs. later it lights, burns for 15-20 secs then flame goes out and it blows smoke ...

heater won't stay lit We changed the wick, and the kerosene in it. Help It sounds like it's not venting properly and starving for air, make sure all the vents are clean on top and bottom. Try lighting

Heater will not stay lit. Flame light flashes It is probably the Air pump or Fuel pump pressure adjustments-- Check out this link-- see if this helps: http://www.reddyparts.com/pressure.htm Mack B

...kerosene heater burn out on purpose so I could relight it but now when I light it the wick will not stay lit-what is wrong? well i let it go out strictly by accident, and what i was told was to cut ...

Kerosene Space Heater. And finally, you say "propane torpedo lights but doesn't stay lit." Which is it? To really help you, I'll need the correct manufacturer's name & model number. And whether it

...kerosene. We added 50 gallons, restarted it and it lit but won't stay lit. Any suggestions? Susan, I suspect you have air in the lines, you will probably have to bleed line at pump. 2nd link explains ...