Questions & Answers for: jumpers Cars & Trucks

keyless remote programming insyructions I have a 1995 pontiac bonneville and I need the instructions to program a factory remote. 95 bonny--1-turn ign switch off 2-using a fused jumper wire jumper ...

when i turn the ignition nothing will happen but when i hook it up to jumpers it wants to turn over ,as soon as i remove the jumpers there's no power when i turn the ignition it wont make a sound ...

My 1998 Jimmy won't start. Just got a new starter. My battery is drain, when i use the jumper cables it still won't turn over. with a new starter, this sounds like a bad battery cable or terminal end.

I need to jumpstart and cant find the battery... The battery should be on the right hand side of the car, in the engine compartment, remember when you jump start it to hook up the jumper cables like ...

naMy doors are electronically operated with a remote control, but my battery is dead and i can't get in to pop the hood open, what can i do to pop the hood open through the out side? You can jump the ...

How do you open a audi q5 trunk when the battery is dead Battery is dead need to charge it but can't because it's in the trunk they don't have keys on them if it is like my Holden omega ...

car will not stay on at idle with or without jumper cables? alternator has been replaced and a new battery has been replaced. Have started the car with jumper cables but when I take jumper cables off,

how to get flash code from ecm ECM not TCM, got you. the car has a connector called a DLC data link conn. the codes are DTCs (modern jargon) diag, trouble codes. you jumper 2 pins, like all cars of ...

I have a 98 isuzu rodeo and my friend hooked up the jumper cables wrong one day and now none of my dash lights or any of the switches on my dash work (4x4, cruise control, etc.) and it's stuck in 4x4 ...

...the starter and connect the jumper cable. Connect the other jumper to the frame. Then connect the jumpers to another car or battery. Use the fob to unlock, then carefully remove the