Questions & Answers for: jl audio 500 wiring

...jl i got the 500/1 ran to the 300/4 but when i cut it up it will cut out for a min Need more info here. did you run power from the 500/1 to the 300/4, or did you run the signal from the 500/1 to the ...

Jl Audio 500/1 Car Audio we have all the wires hooked up right.... I even tested the wires with another amp and that amp worked. I was just wondering if their are any fuses in the jl audio that might ...

Jl audio 500/1 mono amp 2 12 kicker cvr I have a jl audio 500/1 mono amp and two kicker 12"cvr what is the best way to wire up the box i was told 3 differrent ways and was also told the wrong way can ...

JL Audio 500/1 Amp, The green power light is on but no sound! I have a JL Audio 500/1 amp and i ran all the wires correctly. the power light comes on but it doesnt hit! no sound what so ever i have a ...

how do i wire a jl w3 to a jl 500/1 mono jl 500/1 mono wired 2 a jl w3 wire the sub in series it will give you best bang

...jl audio 500.1 Hello smoovek2008, The JL Audio 500/1 outputs 500 watts RMS into a load from 1.5 to 4 ohms. Whether your subs have 2 ohm or 4 ohm voice coils, they should be wired in series and the ...

...jl audio ampbut when connect them no sound comes out the subs what couldmy problem be check the wiring on the back of the subs and try to hook them up different ways to see if the wiring is canceling ...

Jl 500/1 no power at all to amp. Fuse checked out ok in power cable. Hi, 1 probable cause is a bad ground. Check and/or replace wires GROUND.

...jl 500/l, amp will not power down unless underhood fuse is removed check your fuse on the battery and check the fuse on the amp or it might b loose connection of power line and the remote wire(the ...

wiring Schematic for JL Audio 500/ m1v2, I have a flashing green without remote on. Request the schematic diagram directly from JL Audio.