Questions & Answers for: jetta 3 timing settings

...jetta 3 Get no.1 piston at tdc(top dead center)with cam at firing no.1 piston.fit your cam belt.and check your timming marks.Crank pulley marks and cam pulley marks.If you tell me what motor you have ...

..., 3, 4, 2 1 is at end of engine opposite to transmission, set engine to top dead centre using timing mark if you can see them, or take plugs out rotate engine and watch for no 1 piston coming up to ...

...Jetta 1.9 TDI radio is: 1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed. 2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number ...

...Jetta TDI stopped working today a few hours after I successfully changed the hour (daylight saving time). It worked okay for about 3 hours but then stopped. There are numbers (2:34) but they don't ...

Jetta radio is: 1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed. 2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will

Jetta radio is: 1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed. 2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will

cosra 1.3 utility timing marks and setting nneded 2 and 3 white marks beside impeller

Jetta 3, CSL, 1.6. Does someone have any info? Bought the car 2nd hand, no manual. the cam at T will have a mark on the back of the sprocket that lines up with the cylinder head, the crank at the bell

...Jetta 3 1995 1.6 CSL? for unleaded fuel around 6? on idle ,this vehicle has a distributor as such and its possible to adjust this by the 10mm headed bolts on the housing any higher than 8? and the ...

...Jetta is having a problem shifting out of 4th gear, and I need a diagram of the locations of the shifting solenoids please. Any and all help is very much appreciated. double posted same car same ...