Questions & Answers for: jeep wrangler wont start gauges

Question about 1995 Wrangler

2 Answers

JEEP WONT START THE GAS GAUGE WILL GO ALL THE WAY TO FULL AND THE JEEP WONT START. I ALREADY REPLACED THE CRANK SENSOR, FUEL PUMP, IGNITION SWITCH BUT I STILL HAVE THE SAME PROBLEM WHEN THE FUEL GAUGE

Ad

Question about 1989 Wrangler

1 Answer

...jeep wrangler and I cannot use my headlights, turn signals, and stereo at the same time without my electric going crazy and shutting off my engine. With only the car on and stereo the electric gauge ...

Ad

...jeep wrangler and I cannot use my headlights, turn signals, and stereo at the same time without my electric going crazy and shutting off my engine. With only the car on and stereo the electric gauge ...

...Jeep Wrangler oil pressure gauge not working I have a 1997 Jeep Wrangler with 130,000 miles on it. The oil pressure gauge will randomly stay at 0 when I start the Jeep up. Sometimes it will go up to ...

Question about 1997 Wrangler

2 Answers

...jeep wrangler wont start fuel and volt gages stay in the off position with the key on and i get no spark to plugs. I had same problem. Ended up having to replace ignition switch, then gauges and jeep ...

Jeep Wrangerl 2001 will not start every time. Gauges start to dance and go crazy. When I turn light switch on and off everything works fine. Went to Sears they checked battery said it was good, they ...

...Wrangler won't start and the dash board is My 2004 Wrangler won't start, it doesn't make a sound or noise, no reaction at all. Also the dash board is going crazy, all the gauges are moving and the cd ...

Question about 1998 Wrangler

1 Answer

...Jeep Wrangler My 1997 Wrangler will not start. Able to jump after a few tries. Will hold charge and drive fine, but during driving "check gauges" light comes on. Once I turn the Jeep off, it wont ...

...wrangler yj and the oil pressure gauge works but some times it goes crazy and goes all the way one way and another then works again I have no clue what it is another problem i have is with the ...

Question about 1992 Wrangler

1 Answer

jeep wrangler electrical My 1997 Wrangler will only start if I go to the PDC and pull Fuse 6 and stick it back in. When I try to start it without popping the fuse out and in it wont start and the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...