Questions & Answers for: jeep wrangler ignition switch removal

...Jeep Wranger Steering Column is locked. I''m using the right key but I'm unable to turn the key over. It worked earlier in the day. The Column is locked. Key won't unlock, tried 2 keys. I have had ...

Ad

Question about 1988 Wrangler

1 Answer

...Jeep Wrangler. I have removed the lower dash panel and all wire connectors. It's ontop of the steering column so I can't see what to do next. (1988 Wrangler, 6cyl, tilt steering wheel) Thanks in ...

Ad

...Jeep Wrangler will not turn so that I can crank it. If this is the ignition switch, how is it installed? could be, try moving wheel right to left while trying to turn the key, steering wheel may have ...

...ignition switch in the operate position When ignition switch is placed in the position to operate the starter, the engine starts and runs until the ignition switch is released from the starter ...

wrangler 89 wont shut off with ignition switch then the ignition switch sounds to be in need of replacement ... tilt wheel ? if so many of the wires over time tend to bend and break causing a lost ...

...jeep wrangler with auto trans do you need special tools, Do you have to takke the steering wheel off. You need the special Torx Driver with a center divet to remove the steering wheel cover and the ...

jeep wrangler and airbag light came on. Why? DID YOU REMOVE AIRBAG FUSE OR DISCONNECT NEGATIVE BATTERY CABLE TO DISCHARGE AIRBAG CAPACITOR DISCHARGE  BEFORE YOU  REPLACE IGNITION SWITCH 

Question about 2005 Wrangler

1 Answer

...ignition switch Disable airbag, remove steering wheel, remove - but do not disconnect - electrical switch.  In the metal housing near the ignition switch is a small slot.  The slot may be ...

...wrangler 2.5L won't turn off with new switch cranks and runs great just won't shut down Hi there:Bad installing or a problem with the connections.  The most likely problem is a bad ...

...jeep wrangler The ignition key must be in the key cylinder for cylinder removal. The key cylinder must be removed first before removing ignition switch.REMOVAL 1. Disconnect negative battery cable at ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...