Questions & Answers for: Toyota installer

I want to install Toyota OEM remote starter to my 2009 Venza. I want to install Toyota OEM remote starter to my 2009 Venza with factory installed push button starter and factory alarm. Any ...

How do I assemble the front break disc pads on a 2004 Toyota Tacoma 2wd? To install: Siphon a small amount of brake fluid from the reservoir. Press in the brake caliper piston with the proper tool. ...

timing chain is loose how do I replace or tighten You need to pull out the timing cover. 4-6 hours of work. Here is the step to remove the Cover, then you need to remove the Sprockets. Remove the oil ...

Will I need a caliper reset tool kit to change the brakes on my 2007 toyota sienna or will a standard c-clamp do the job? And since it is an ABS system, I assume that brakes must be bled, correct? ...

2005 toyota corolla. no problems yesterday..this morning it was dead. I can jump it and it turns over but it won't stay running. doesn't seem to be getting any fuel. Which fuse could be causing this ...

how to change brake pad and check rotors Brake PadsRemoval & InstallationFront To Remove: Drain brake fluid to ½ full level in reservoir. Remove the front wheels. Remove the front brake ...

need to replace 2003 corola front wheel bearings. need step by step instruction please Removal & Installation To Remove: Remove the front wheel. Remove the front axle hub nut. Disconnect the front

...and READ it thoroughly 3. If you don't understand how to install it, find a qualified professional installer locally and have them install it correctly 4. You don't want to mess up your car's

How to remove thermostat on 06 Toyota alvlon 3.5 engine (a) Install a new gasket to the thermostat. (b) Install the thermostat with the jiggle valve facing up. HINT: The jiggle valve may be set within

I need the torque spec for the cylinder valve cover 2004 toyota sienna? 20. INSTALL CYLINDER HEAD COVER SUB-ASSY (a) Apply seal packing to the cylinder head as shown in the illustration. Seal packing: