Questions & Answers for: infocus blinking power light

...infocus.com/support I have thise exact same problem, and the orange light blinks over 20 times?? What does it mean? I too am having an issue with the projector's orange light blinking.. blinking ... ...

InFocus unit would power up and stay powered up with no problem until I connected it to the computer using the analog computer cable (blue connectors). They had me try it with a different computer and

INFOCUS Lamp replacement Just replaced lamp and unable to reset lamp clock. Followed instructions in manual and it still wont reset. The projector sounds like it is trying to "boot" up but it just ...

...Infocus 72 projector bulb failed after only 311 hours. I purchased a new bulb and after 20 minutes the projector turned off and I got the red blinking light again. I got the red blinking light after ...

...InFocus LP70 secondhand, refurbished. it has been working for over four years. This is the second time i am having this problem with it.When I push the power button, the LED lights green, the fans go ...

...infocus will not come on. the red light blinks. change the bulb but didn't do any good check the colorwheel. if the colorwheel doesn't spin, the lamp won't light. if no fans come on either, replace ...

InFocus ScreenPlay 4805 no projection. Unit powers on and green light blinks, but no light and no fan, eventually red light blinks continuously about 2 seconds between blinks. When the green light is ...

Infocus X1 Projector started with 3 blinking red lights. Project started with 3 blinking red lights. Replaced bulb, reset to factory settings, but bulb lens cracked, so sent that one back and got ...

Infocus Screenplay 4805 No Display, help? I flipped the power switch and the colorwheel starts spinning but stops, this happens 7 times. I replaced the lamp As the colorwheel starts & stops there ...

...infocus in 116 projector. When pluged in the machine will not turn on the power light just keeps blinking a blue light I have also changed the power cord It might be a problem with the circuit that ...