Questions & Answers for: homelite chainsaw leaks bar oil

homelite superxl chainsaw? For 1 gal. 16:1 ratio for most 2-stroke oil brands. A service manual recommends tro check the ratio marked on the bottle if using Homelite brand 2-stroke oil. For other oils

homelite xl-130 chainsaw require? the homelite xl-130 gas/oil ratio is 32:1 meaning one quart of gas and one oz of 2 cycle engine oil or one gallon of gas and and one 4oz bottle of 2 cycle engine oil.

...Homelite 16" 33cc chainsaw? What is the mix for my Homelite 16" 33cc chainsaw? Also, can I use any kind of oil? If so - which? 10w5 10w30 50:1 is the fuel to oil ratio. Never use petroleum oil ...

...homelite bandit chain saw 33 cc. if so how much. just got it from a pawn shop Yes! Normally 32:1 gas oil mixture is what you will need. The easiest way is to buy the oil in pre-measured bottles ...

what is fuel ratio of homelite 2.6 oz. syn. oil You buy a bottle of 2 cycle mixing oil for your saw. The directions on the label apply to all mixes. it does not matter the size of the saw.

...homelite chainsaw bar leaks oil in my case how can i fix the problem Drain oil back out of tank B 4 you put away , its also a very good idea if you drain and purge gas tank as well , as either of ...

...bar oil from leaking after its turn off what do i do to stop the bar oil from leaking when its in the case M/T out oil tank b 4 you put saw away me I save peanut butter jars for this function , as my ...

Homelite Chainsaw Repair (part #309514001) ... spark plug wrench, cord, clutch removaltool, adjustable wrench, needle-nose pliers ... The chainsaw guy shop talk Repair Homelite 150 chainsaw Auto Oiler

Homelite chainsaw ut10560A leaks bar oil, how do I replace the oil tank and check the pump and oil lines? Would say the tank is not problem, believe this model may have a check valve In cap, would ...

homelite LX30 chainsaw,ive been told 30/1 50/1 25/1 40/1. Which is correct thanks. Homelite LX30 Bandit with 30cm bar Find an oil you like and mix it according to the oil recommendations. I use Opti-2