...GMC Sierra 1500 w/6cyl has a fluid leak around and from the starter. Started to intermittently clunk when turning over today. Sounds like drive gear teeth may be missing. I am going to drop the ...
gmc sierra. when i put it in gear, I have a 2002 gmc sierra. when i put it in gear, the drive shaft clunks at the rear axle, then makes another 1/2 revolution. when i drive around corners and turning,
...GMC sierra has a clunk. It happns when I am coasting, say while turning or slowing in traffic then I exelerate about 50 - 75% of the time I get a singe clunk. It seems it occurse most when it is ...
...gmc sierra clunk noise in drive line when realising brake pedal to excel on gas pedal The drive shaft yoke is dry on the transmission out put shaft. When you stopp it slides in on the shaft, and then ...
GMC Sierra 1500HD, still have warranty for another 500km and i've been noticing some play in thr rear end it's like both rear wheels are not in sink. usually happens when im pulling away from a light.
...service and adjust rear brakes. If not, go to the drive shaft, check the u-joints and/or jack up the rear of the truck and rotate your tires by hand to see if there is a clunk in the rear end
rear end almost all of the time. It seems to go away at high speeds but has devoped a humming sound or a vibration then. Also every time i put it in to forward or reverse it makes this clunk sound. It
Question about 1989 Sierra
...clunk My rear transfer case seal is going now my truck clunks when I put it in reverse could this be why No. The transfer case takes Dexron/Mercon 3. What was installed instead, for fluid? If motor ...
clunk when coming to a stop has a clunking noise when coming to a stop.feels like someone hit me from behind. That clunking noise you get it whilst you are braking or just as you are coming. If it is ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions