Questions & Answers for: gmc jimmy air coming brakes

Question about 2000 Jimmy

1 Answer

...jimmy 2000, got the caliper problem, ive put 2 crush washers on both but im not getting any air or oil coming thru to the bleeders, do u have any other solutions to my problem?? thanx Did you happen ...

Ad

Question about 1995 Jimmy

1 Answer

...GMC Jimmy I have a two-fold problem. I replaced the spark plugs in July and had trouble with the firing order. We got that part figured out and it's been running fine since. However, shortly after ...

Ad

...GMC Jimmy, flutters when in idel I was at a stop light when I heard the egine began to flutter. I sounded like it was going to turn off. When the light changed for me to go, the truck would not move. ...

...gmc jimmy it takes two people to do, one to pump and hold the brake peddal and one to open the bleeders.... One person pumps the peddal 5-6 times and holds, while the other starts at the Passenger ...

...brakes it to let them gravity bleed them selfs out! works great for me! take the brake fluid reservoir cap off and open one bleeder at a time let the fluid run out of it till you see no more air! if ...

Question about 1998 Jimmy

1 Answer

...coming on everytime I push tha brakes and it feels like there are no brakes the pedal comes back up after I push it down I recently had tha fron calipers replaced with pads and a brake fluid flush ...

...jimmy when I turn the ignition on the indicator lights (brake, check engine, air bag, etc. ) don't com on. The motor turns over all the other electric components work. The fuel pump is not comIng on ...

Question about 1997 Jimmy

1 Answer

gmc jimmy. The vehicle runs fine but the temperature gauge never moves. There is air coming out of the AC blower but it's always cold. The fan works fine. I was wondering why my temperature gauge wasn

Question about 1999 Jimmy

2 Answers

coming from the bleeders, is there fluid present at the hose inlet of the caliper? Need to verify fluid present at rear or not... blocked or bent steel fluid line, take the steel tubes off the backing

...gmc jimmy 4x4 down the roa and i come to a stop the brakes go slowly down to the floor ,i dont see any leaks and just changed the master cylinder and still does the same Could be air in the brake ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...