...5 speed. 5th gear pops out every time I accelerate. All others 1 thru 4 and reverse function properly. The problem is only with 5th gear. Is there a simple solution? no. linkage most likely you need ...
I HAVE A 5 SPEED MANUAL TRANSMISSION, 5TH GEAR AND REVERSE DON'T WORK. ANY IDEAS? Could be the syncrnizer No Suchros on 5th and reverse, Geeze
Question about 2007 Impreza WRX Sport Wagon
...manual. I hope it is of help. Non-turbo Turbo Sedan Wagon Type 5-forward speeds with synchromesh and 1-reverse Transmission gear ratio 1st 3.454 3.454 2nd 2.062 1.947 3rd 1.448 1.366 4th 1.088 0.972 ...
...5 speed manual transmission? If it is noisey in all gears except for 4th, then the problem is countershaft bearings. Most likely bearing in your cluster shaft, in 4th gear all load is off the cluster ...
...5 speed transmission should be spring loaded to naturally end up in line with 3rd and 4th gear. You should have to push the gear shift to the left to get it into 1st, and push to the right to get it ...
5 speed manual transmission issue I just purchased a 1998 S10 2wd with a 5 speed manual transmission, overdrive (5th gear) pops out when not under load, although this issue is eliminated by simply ...
Question about 2000 Firebird
...5 speed manual transmission,,, when u shift from 3rd to 4th the shifter does move a little sideways to go between the gears... but will not swing over to go into first or second,,, u can try to go to ...
Question about Motor 2002 Elantra
...5 speed manual does not shift into 5th or reverse. Car has 85,000 miles on it, but does not shift into 5th or reverse. Anyway to determine cause without having whole transmission taken apart? Shifts ...
...5 speed...most of these Cavaliers were 4 speeds...with reverse being upper right instead of 5th gear upper right...confirm in your owners manual if possible...will show illustration...Hope this
Question about 1999 Frontier
...5 speed transmission it will only go in first and second gear will not go into 3rd 4th or 5th or reverse clutch seems fine what's the problem Hello. It seems the 'shift fork' is either 'misaligned' ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions