Questions & Answers for: glass broken canon printer

...broken glass? HI mate, saw your post... wondering if you could help with my unique (or so I think) problem... I just switched on my MF4140 (MFD)..after an excruciating shipping of it all the way from ...

...thx.in advance for ur suggestions Call service it may be lamp pcb or broken belt or ... try to open the upper glass and move the scanner unit to the back and retoch the glass and turn on the ...

glass broken The glass on my Canon MF8180c broke during a move interstate. Is it an easy task to replace? My concern is that if this unit took a hard enough bang to bust the glass, what else suffered?

...a bad thermistor/thermal switch, or a bad AC driver board. Check the fixing assy first. Its the easiest to get to. Look for broken glass enter on the service mode and choose the clear error

...glass is broken on my Cannon PIXMA MP460 - I want to have that replaced.. what would be cost The Canon scanners are only one piece, you can only replace the entire scanner as no separate parts are ...

The platen glass is broken on my Canon MF6540. Where can I buy a replacement? Canon Parts you may need to look it up on google .

...glass. First you must lift the dadf all way up, because (from front looking) on left side under /by dadf hinge is white flap.This flap registers the lifting and pulling down of dadf.Probably is only ...

broken glass for the scanner bed Unplug it, take the cartridges out and throw the printer away. Then go out and buy a new printer. ...

...can replace a broken one myself if I can get the right kind of glass. Try ordering the glass from the parts department of the manufacturer. That way you'll know the glass is the correct type and

...broken platen glass on Canon MX340 printer Hello Paul, Unfortunately, if the error still remains, we would have to advise that you contact our support group for additional assistance. Call Now at +1 ...