Questions & Answers for: gauge cluster ground 1997 jeep

...gauge not working I have a 1997 Jeep Wrangler with 130,000 miles on it. The oil pressure gauge will randomly stay at 0 when I start the Jeep up. Sometimes it will go up to where it's supposed to be, ...

...1997 jeep wrangler. The oil gauge goes up and down when I drive. It has oil and I already changed the oil sensor. If grounding the dash does not work, try putting a mechanical gauge on it and reading ...

...cluster'', sounded pretty good to me...but it is fine. Is there another fuse for just the gauges? I have a 1999 Cherokee.Dash is dead.Put new one in still dead.Don't have a clue ck the engine to body ...

Jeep Wrangerl 2001 will not start every time. Gauges start to dance and go crazy. When I turn light switch on and off everything works fine. Went to Sears they checked battery said it was good, they ...

cluster on 97 Wrangler Speedometer, fuel gauge, temp gauge, oil pressure gauge, odometer and tach only works at times.....indicater lights work fine IF YOU REMOVE INSTRUMENT CLUSTER AND UNPLUG IT,PLUG

cluster on 1997 Jeep Wrangler...gauges will work for a few seconds after start up..then all gauges stop working. Indicater lights in cluster seem to be ok. Have taken the cluster out several times and

1997 Jeep Wrangler My 1997 Wrangler will not start. Able to jump after a few tries. Will hold charge and drive fine, but during driving "check gauges" light comes on. Once I turn the Jeep off, it wont

...gauge cluster out and cleaning the connectors then apply some dielectric grease. this may help with the speedometer. to remove the gauge cluster, pop off the top vent cover (3 clips), then remove the ...

...radio,battery good starer good.when you try to start inst.cluster does not come up. check your engine block ground or the battery ground make sure the engine is properly grounded or is still ...

.Why would the gauges not work lots of reasons, old post. fuses (2) blown makes whole cluster dead is it all dead?