Questions & Answers for: garage door travels far

Garage door won't close garage door lowers then opens again with lights flashing about five times, craftman model 139.53975srt1 your door travel screw is set to go too far on the downward travel. you ...

...garage door opener while I was away. Now my travel limit adjustments are all out of whack. The door wants to travel down and up way too far. Is there any way to reset the limit screws to where they ...

...garage door seems to want to travel too far up and down. The travel adjustment screws don't seem to do anything (almost like they're at the end of their adjustment range). Door height and all is ...

Door opens about 1 foot too far, the use of the travel up screw either appears to do nothing or it does too much when adjusted. How do you know how many inches the screw is affecting in a turn (or ...

...gARAGE DOOR OPENS ALL THE WAY BUT ONLY HALF CLOSED Go to the main unit ( motor ) on one side youre going to see two holes , one is for set up how far will open , and the other hole is to set up the ...

garage door travels all the way down and then reverses on it's own. What adjustment do I need to make with the tension or travel and how do I do it? We've fixed it before, but I can't find the manual.

...garage door keeps going up randomly. Both remotes are in the car so there are not being pushed..dont know what to do Try to re-program travel and force limits. Make sure that travel limit (down) does ...

...garage door goes all the way down but then goes right back up - it does not close Had similar problem. Re-program travel and force limits. Make sure that travel limit (down) does not go too far (thus ...

...GARAGE DOOR KEEPS OPENING AND CLOSING. AND ONE OF MY SENSORS IS ORANGE INSTEAD OF GREEN. WHAT IS THE PROBLEM? As I have mentioned in other post, re-program travel and force limits. Make sure that ...

...garage door opener 139.53919 I need to change the travel limits on my garage door opener, the arm hits the plastic lens on the opener body when raised Open the garage door fully by pressing the wall ...