Questions & Answers for: fuses control door locks 2000

control stopped working I have a 2000 Ford F350 diesel. The cruise control no longer works. I have check the fuse box in the dash as well as the engine compartment. Any ideas? Thanks John Longview, Wa

control switch on the drivers door and still nothing. any ideas? Did you check for power at the switches. Are you sure the fuses are ok. Sometimes the wires break because of opening the door. You will

...panel it soaked up most of the leak until I got the leak fixed. My door locks would start locking and unlocking and all the dash lights and dome lights would come on untill the battery would go

door lock wiring diagram for 2000 f350 super duty Sounds to me like you have the common lock not locking anymore. They may move a little but wont go past a flicker. If thats the case these trucks have

door locks? Automatic door locks - lock relay on doors are dead. Fuse under dash for locks is ok. Can't determine which fuse under hood in fuse relay centre is for electric locks. Thanks for your help

...fuses to the power door locks on a 2000 F-350, you can hear the click of the relay and the locks wont move. any ideas what it could be If you are hearing it i don't think the problem is in the relay ...

door locks move a little but wont go all the way to the lock or unlocked position Pop off interior door panels & lube up door lock actuators with a good penetrating oil, move lock buttons back ...

...locks all at once. You can hear them move but it is no enough to lock or unlock the doors. I don't think it's all the actuators. What could it be? what you are hearing, possibly is the door lock ...

...door locks not working Check fuses first, then switches on both doors, if nothing still you will have to pull the door panels and inspect the master lock switch (drivers door) and see if anything is ...

...door locks My door lock on a 2004 f350 won't work. I'm not sure but there should be a fuse that's in the circuit. Because I doubt everyone of the door lock actuators aren't working. They are ...