...one, Solder will heat up and cool down at different temperatures, this will cause a small ring fracture at the connection, simply re soldering this will fix your
Question about PT-65WX51 65" Rear Projection Television
samsung sp42w5hfx stanby light flashes and clicks wont start up i have just had the 2 ics changed for a convergence prob stk392 -040 but i noticed on the old ics they both stated on them stk392-040 ...
Panny Pt-51hx40 shuts off Hey, I have a Panny PT-51HX40 RPTV that is about 10 years old. It worked fine yesterday, now today when I turn it on, it comes on for about 2 seconds, then turns off. I see ...
Scanner No Paper Detected Error I have a Panasonic KV-S3065CL scanner that keeps giving a no paper detected error when there is paper in the document feeder. I have replaced the sensor and cleaned, ...
Question about PT-47WX53 47" Rear Projection HDTV
...can help you I will. I have seen about two dozen of these sets with this problem---if the cap has a fracture or crack it is gone--if it looks ok it still may be open. SD ...
my sky remote will not switch my tv on or control the volume OK, to see if it is remote or TV, please do this, Use the controls on the set, see if the set will respond to the menu, up, down,select, ...
...of components including (but not limited to) the vertical IC. Dry solder joints and/or hairline fractures within the copper tracks on the board can cause the vertical collapse as well as leaky ...
Question about DMR-ES40VS DVD Recorder/VCR
My DMR-ES40V Panasonic fell to the carpet dangling from the wire still plugged.Now the unit will not turn on.The plug on the back of the unit is OK.I tested it with another unit Sadly, that could be ...
battery will not charge Maybe a 14,4 v battery with 1,5 AH year 2013 bought ?? there where a few series of hidden defects that early time the early build s tool in combination with the EY7441. or the ...
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions