Questions & Answers for: ford ranger fuel line clips

...Ford Ranger EXT with a 4.0 liter V-6? Thank you. the fuel filter is on the inside of the frame rail just aft of the driver under the truck. You may need a little spring clip release tool to get the ...

...ford ranger. my truck sometimes is cranking and i have to pump the padel to help it get started, i think it could be the fuel filter or the fuel pump. what do you think? the fuel filter is on the ...

...Ford Ranger 4 Cylinder the brake line is leaking behind the fuel tank I belive it is a plastic line is their an easy way to fix it not having to remove the fuel tank Thanks Andreas I also have a 1989 ...

...Ford Ranger - the parts stores keep giving me fuel line remove tools that do not fit. ford has several different sizes for full size, not sure about rangers though. They are called fuel line tools ...

...Ford Ranger Fuel filter replacement. I cannot get the clips off the fuel lines and do not want to brake them. The high pressure fuel line clips are tricky you must use a small straight slot ...

Ford Ranger fuel filter replacement. Where is the fuel filter located? Inside the frame rail on the driver's side. You'll need a 5/16" (8mm) socket if it is the type that is held in with a hose clamp,

...ford ranger. I bought a tool that says that is what it is for but it didn't come w/ directions pull the metal retaining clip off of the fuel line. you slide it over the fuel line , slide it into the ...

...ford ranger, can't remove two lines to the fuel pump that have clips holding them on Push line on,squeeze colored tab and pull off Your local parts store will have the tool to do this. Resembles a ...

...Ford Ranger How to remove fuel lines from fuel tank special tool (about $15 at any parts store). It pushes in around the fuel line to release a clip inside , then the fuel line just slides off. ...

...ford ranger 2.9 liter look under truck at drivers side door for the fuel lines. they will go into filter there and back out of filter there.you're looking for a round canister,you'll need to release ...