Questions & Answers for: ford focus knocking noise driving

Question about 2000 Focus

1 Answer

...noise coming from underneath front can't tell which side sounds like a spark knock. This happens when going up a grde and soon as you let off the excelarator it will quit for a few seconds and start ...

Ad

Knocking sound coming from the Passenger side front axle I have replaced: strut, strut plate & bearing, hub & bearing, axle, sway bar links, motor mount and noise still there. it sounds when driving ...

Ad

Question about 2003 Focus

1 Answer

Knocking noise on 53 plate focus I have a 53 plate fors focus 1.4, i recently had the clutch redone as it was wearing. after coming out of the garage it started making a knocking noise on the gearbox,

...Ford Mondeo Zetec 2000cc mk2 Suddenly heard a loud-ish ticking/knocking noise from up around the camshaft area, left hand side next to belts that would occur in bursts of 3 or 4 clicks at a time with ...

Question about 2003 Focus

1 Answer

...of the top coils of the springs. A revised rear lower arm spring seat has been fitted since 02/2002. Source: ...

...ford focua 2001 mk1 and i was tharshing it about in a car park now it makes a wierd knocking noise i just seeing if anyone knows what it could be it sounds like its cuming from the cambelt or maybe ...

Question about 2001 Focus

3 Answers

...knocking noise coming from the right passenger side tire. What could that be? Hello, There are a lot of moving parts in the front end. You may have a bad CV joint which is on the shaft that turns the ...

Question about 2001 Focus

1 Answer

...knocking/clanking noise. Just had the rear left passenger suspension spring replaced but been making that noise for a while - got no clue what it is or could be and dont want to take it into the ...

...ford focus. i have renewed the bearings, shoes, cylinder but the noise is still there could it be from anything else. please help its like a knocking when i drive on rougher terrains check the rear ...

...knocking sound on turning either right or left depending on which side the ware is on. Grinding noise would suggest dry rather than worn shafts. I can't think of anything other reason for this that ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...