Questions & Answers for: ford fiesta clutch problems car

ford fiesta problems The blowers dont seem to be working in my car because they are not blowing out any hot air. What could the problem be? Is the problem that the blower is still blowing but there is

ford fiesta hydraulic clutch not working the clutch pedal is going all the way down fast and so there is no clutch at all , what could be the problem ? your clutch went bad, need to replace it.

...ford fiesta P reg. the only way to get it out off gear is to stall it or switch off the engine, once this has happened you need to get your hand under the cluth pedal and pull it back up, any idea ...

...ford fiesta clutch is not working cant shift to any gears I guess the clutch system must be a hydraulic one, check the clutch master cylinder and slave cylinder if they are functioning. If they are ...

...Ford Fiesta. Rattling soun when clutch is depressed. I have an 02 Ford Fiesta. When I depress the clutch I hear a loud rattling sound which vanishes when the clutch is let out. Could the problem be ...

...Ford Fiesta. Rattling soun when clutch is depressed. I have an 02 Ford Fiesta. When I depress the clutch I hear a loud rattling sound which vanishes when the clutch is let out. Could the problem be ...

Ford Fiesta: When depressing clutch a very noisy rumbling sound but gear changing as normal. I added some gearbox oil and the noise stopped. Then, just the following day, no resistance when depressing

Fiesta goes into gear but wont move Clutch recently went on my car, i got this replaced but yet the car would not move. I was then told that due to the clutch being completly burnt out that it had ...

...ford fiesta 2012 the Pcm & tcm lost connection and the car wont start what could be the problem check to make sure you connected all the wires back together properly and check your grounds to ...

...ford fiesta when A/C is ON, can hear the clutch engaging but no cool Air coming Any idea what's wrong Thanks Possibly the system needs new service valves and recharging if the compressor is running. ...