Questions & Answers for: fluid measurements

Question about 1997 Jetta

1 Answer

revs to 400 rpms before accelerating........transmission Sounds like its low on fluid or the filter is plugged up. Check the fluid first of course. Remeber the automatic needs to be in neutral with ...

Ad

Question about 2000 7 Series

1 Answer

If there is inadequate of transmission fluid in my 2000 740iL will it move if I shift it to drive gear? Where is the transmission fluid hole in order to add some fluid? Hi there, Transmission Fluid is

Ad

transmission slipping on 03 GMC Envoy. what does iy mean when trans fluid measure high on dip stick? Transmission started to slip yesterday. I measure Transmission fluid after letting the car warm up.

2007 low rider replacing front sliders with chrome sliders when measured fork fluid level on original slider fluid measured 1.5 inches from top of tube manual state should be 4.3 inches witch is right

Question about 2003 Envoy

1 Answer

What is a flow meter? Wikipedia: Flow measurement is the quantification of bulk fluid movement. Flow can be measured in a variety of ways. Positive-displacement flow meters accumulate a fixed volume ...

Question about Water Pipe Heating Cable

1 Answer

How many fluid ounces in a pipe measuring 5mm X 1m How many fluid ounces in a pipe measuring 15mm X 1m English? Would that be approximately 3 feet of 1/4 inch pipe? 3 feet of 3/4 inch pipe?

Question about Water Pipe Heating Cable

1 Answer

how many fluid ounces make a pound ? That depends. Fluid ounce is a measure of volume while pound is a measure of mass (or weight). It takes about 16 fluid ounces of water to make a pound, while about

Where do you check the transmission level on a 1995 Polaris 425 Magnum. How do you add fluid? on any vehicle with an automatic transmission, there are two dip sticks. One to measure oil level, and the

Question about Water Pipe Heating Cable

2 Answers

How many grams are in 50.7 fluid oz? Gram is a measure of weight (or mass). Fluid ounce is a measure of volume. There is no direct conversion between them, since it depends on the density. For example

...temporary dipstick they will use for rough measurements. Getta haynes manual for car at parts..ithink u need to measure fluid where ufill it. They say u dont need to svc trans..dont believe it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...