Questions & Answers for: factory reset projector

...factory reset but its still there. Rather than hitting the factory reset, you need to reset the lamp hours. With the power on, press and hold the brightness up and brightness down keys on the ...

...Factory Reset within the projector options. You should be able to select that option without a source attached to the projector. What the option does is set every settings of the projector back to ...

...menu? If so, do a 'Factory Reset.' That will re-set it to the parameters it had when it first came out of the box. Factory Reset is usually buried a couple of levels deep, in an 'Advanced'

...reset projector to factory default settings My Acer X1261P Projector is stuck on one input source (VGA) and I do not have the remote to change it's settings, so I need to set the projector back to ...

...factory reset To restore all the projector settings to their factory-default values, select the Reset menu (very bottom of the Menu tree), highlight Reset All, press Enter, and select Yes to

...factory reset. Cleaned lens. Replaced bulb back to original purchase Bulb now, to ensure bulb was in working order. Reset all colour setting and complete factory reset. sounds like polarizer

...reset to factory default settings on projector sony VPL-DX126 On the projector VPL-DX126 I changed defaulth password for setup on the Web Control Window of the Projector. How to reset to factory ...

...Factory reset: If all else fails, you may need to perform a factory reset on the projector. This will erase all settings and restore the projector to its original factory settings, including the ...

...Factory reset: If all else fails, you may need to perform a factory reset on the projector. This will erase all settings and restore the projector to its original factory settings, including the ...

...factory reset: A factory reset can reset the projector to its default settings and may resolve the issue. You can perform a factory reset through the projector's web interface or by connecting to the ...