Questions & Answers for: ev microphone repair

...EV/Microphones/Service%20Manuals/PL20%20&%20RE20%20Service.pdf Cheers, NTIMID8 I have the same prob with mine. I opened it and found that a little plastic thingy was loose UNDER the diaphram! I can't ...

...EV Wireless Microphone System ) with hand held microphones ( HTU2D-767a), I?m looking for the rubber gaskets that hold the mouth piece in place inside the microphone. Thanks Frank here is a contact ...

...EV and other service facilites all told me the item and its servicable components had reached sunset -- No solution no matter how much I begged. I loved the olde hammer (salesmen would pound a #10 ...

wiring diagram for EV beltpack mic TA4 connector This is the page you need:http://www.electrovoice.com/tech-library.php?pt=2 If it's not there try emailing them. Please let me know if this helps.

I have two ev co9 mics, neither of them seem to work, where should I start??? These are fairly decent microphones.......I would suspect the cable might be bad. If the mikes are actually not working ...

...EV re-27 to a laptop what kind of electrical connections do I need? Excellent microphone! There are a number of inexpensive XLR microphone to USB adapters now on the market. Two good ones are Blue's ...

I need replacement sleeves for EV nd257 mics. Original sleeves became brittle and crumbled. Are these available? http://www.fullcompass.com/brand/EV/Accessories-Parts-Hardware.html Found this... maybe

...microphone: http://www.electrovoice.com/sitefiles/downloads/Repair_Info_Form.pdf Send to: EV Microphones Service Facility 8601 Cornhusker Hwy Lincoln, NE 68507, US Tel: (800) 553-5992 Fax: (402) ...

...EV RE 20 microphone and its not working correctly. there is a very low level and i have to turn up my preamp completely. also it sounds like theres a lowcut activated, wich is not the lowcut of the ...

...EV) N/D967 Microphone. I need a wiring schematic for it. The microphone had red and black wires that have become detached. Red and black wires detached Question heavily edited for maker, proper model ...