Questions & Answers for: eliminate squelch radio

...squelch off is deafening. Thank you for any help. Respectfully, Phil It is either a programming problem, such as the Rx is not programmed correctly OR your radio needs to be looked at by a technician ...

...receive transmissions all we get is static on radios, we have tried all channels and they have different pitches of static or squeals. Turn the squelch knob eathier up or down to eliminate the

...radio unless i hold down the monitor button for open Squelch .they transmit both fine.thanks rob It is likely, the Interference Eliminator Code set differently between the radios. If you can hear ...

...What you are referencing is "white noise" or "squelch tail". This can sometimes be reduced or eliminated by changing your interference eliminator code from zero (off) to a numbered setting. ...

...squelch won't turn off. Is there a way to restore factory settings to the radio to eliminate any problems that may he caused by software settings? Select the channel you want to adjust the CTCSS/DTCS ...

how to eliminate the static sound when turning a radio on & off Set the squelch tighter.

spectra w5 dash mobile has squelch tail on scan mode Reprogram radio to turn on reverse burst to eliminate squelch tail.

...to others when i have the other radio next to it it does not connect with the other one Check: Frequency of both radios (Simplex) Sub audible tone same on both radios (used to eliminate squelch

...open squelch (aka without a tone code, private line, PL, interference eliminator). If your radio has a CODE turned on, your radio will block receiving radios without the same exact code. Best

...eliminate the volume of the static between transmissions To reduce the static bursts between radio transmissions alter the squelch setting on the radio. You must have a laptop or computer with ...