...E18 error. I tried everything at http://www.e18error.com/repair.html but still no luck, ready to take it apart and see what is stuck It just happened to me yesterday, and sounds exactly as the above ...
Question about PowerShot A70 Digital Camera
...E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the ...
...E18 is a lens error. My guess would be sand got into your lens (into the gears, etc.). These guys should be able to take care of you. ...
...E18 error. I played around with the zoom and it seemed to fix itself. I took a couple of pictures today and now the zoom will not go out. I can't view my pictures or anything. It beeps and all I see ...
...E18 error, you most likely have a problem with the lens sensor located around the O-ring inside your lens barrel... either the sensor itself is damaged or the little plastic piece on the O-Ring that ...
Question about PowerShot S2 IS Digital Camera
...E18 in the lower-left corner. The lens gets stuck in the extended position, and refuses to move either to focus the lens or to retract when powered off. Apparently, people who posted about this ...
...5900c E18 error Error DS42026 Sense key 0x4, ASC 0x44 DDES 0x14 Need to replace exit sensor Maybe the wire unplugged somehow or sensor is dirty, third reason is damaging of it, then nedd ...
...E18 error - cleaned the sensor and now I have constant paper jams - cleaned all of the other sensors. Any ideas? Often Paper jams are caused by the rollers being dirty not the sensors. Cleaning ...
...E18 Sensor Alarm" is displayed when malfunction of sensors occurs. Check whether the cables between Control PCA and sensors are damaged and also check all the connectors are connected properly. For ...
Question about fi-5900C Pass-Through Scanner
E18, E08, don’t know how, any ideas? This error set is related to the dryer overheating, check the vent to the outside to be sure that there is good air flow. Then you have to test some of the devices
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions