Questions & Answers for: directions replace tension pulley 2005

...replace belt tension pulley for dodge neon 2002 how to do i pull the pulley off and put a new one on. The power steering and A/C belt is tensioned by a tensioner pulley. Mine went bad and was ...

Ad

...pulley in a 2003 Dodge Neon I need to know how to remove the tensioner pulley in a 2003 dodge neon. Everything I have found so far, including the haynes manual says remove the engine mount and then ...

Ad

...the belt. It is the Tension arm/pulley's job to do so. If the belt is loose, then it either means the belt needs to be replaced, its the wrong belt, its routed wrong, or the tension pulley/arm is

replace a tensioner pulley on a 2005 dodge neon ok shade tree, here, remove power steering unit, motor mount, on pass side , take bolt out that goes to motor- thru fron the inner fender its behind ...

Question about 2005 Neon

1 Answer

...replace the tensioner pulley on a 2005 Dodge Neon? You have to remove the whole bracket that the tensioner assembly is attached to then you can get at the bolts that holed the tensioner and pulley ...

Question about 2005 Neon

1 Answer

...replace the tensioner pulley on a 2005 neon? i have the tool to remove the power stearing pully. is there also a tool for the tensioner pully? will i have to pull the motor? No you will not have to ...

Question about 2005 Neon

1 Answer

...pulley and put a wrench on that bolt and apply presure in the allowed direction and take the belt off...look first to see if there is a diagram of how the belt goes back on if there isn't write one ...

...tension pulley on a 2005 dodge neon remove the belt, then remove the pulley, you may need a tensioner bar or sometimes a 3/8 ratchet will fit. when you instal the new one there may be a keyway or ...

serpentine belt routing diagram for 2004 dodge neon i need help finding a belt routing diagram for 2004 dodge neon over p/s pulley,down to a/c pulley ,up to crankshaft pulley ,under tensioner pulley

...tension off the belt and then move each pulley by hand . If the tensioner pulley feels rough or makes a noise, replace it. Same goes for the power steering, although the pump may be noisy without the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...