Question about DC616kn 18 - volt 16 - gauge straight finish nailer
dewalt dc618 nailer is not firing my nailer is about two years old,but does not seem to be firing,the battery is good because the gun loads up but dosnt fire .what could cause this problem I have both
dewalt dc618 wont drive a nail gun lights up,when you pull the trigger the motor runs,when you press it down it will not shoot a nail.the safety is not on.the plunger will not work. problem ...
...gun wont fire the lights keep flashing then when you pull the triger the light stays on but will not fire Had the same problem with mine. Remove the 3 screws on top and remove the lid. on mine the ...
Question about DC616KA 18 - Volt 16 - gauge Straight Finish Nailer Kit
...dewalt.com/Products/Detail?productNumber=DC616KA# Low battery charge or damaged battery Charge or replace battery Depth adjustment set too shallow Rotate depth adjustment wheel to a deeper setting ...
dewalt dc618 wont fire Changed one of the rubber bands that return the firing pin. gun fires once then battery flat light flashes and it wont fire again. remove battery and refit it and the gun fires ...
Usually answered in minutes!
317 Questions
162 Questions
122 Questions