...styrofoam float back and forth so that is working it seems like. So, I don't know if there is a switch that is shot or what the problem could be. Any help would be appreciated. Thanks. To find out if ...
...Dehumidifier tiped over and now just flashes full. What can I do? Check to see if the styrofoam float is in place correctly. Hopefully this fixes your problem. If the little plastic finger is broken ...
...dehumidifier... used for 3 years, stopped making water. Recently overfilled, auto shut off hadn't worked and water level overflowed. 2 days later can't get to make water. Tried all the settings. ...
...dehumidifier continues to run after it is full, spilling water out of the full tank. How can I fix this? Diane, the float valve in the left top of the bucket (it's styrofoam) is stuck and ...
dehumidifier that needs a Styrofoam floater. It's an older model. Model number is m7dh45b2a If all you need is the float bulb, you can find it at the following link. It's part number CRCFD5405
...dehumidifier. Can I connect it back on? If you are referring to the Styrofoam ball at the end of the float valve, you can if it's not cracked or water logged. Just be careful doing it. Also, make ...
the float is broken If all you need is the Styrofoam float, you're in business, If it's the entire float arm you're not so lucky. See ref numbers
Question about FDL50R1 Dehumidifier
...dehumidifier float was packing material & threw it away. Now my dehumidifier gets too full before the "full" sensor comes on. Can I replace the styrofoam? I thought the styrofoam inside the ...
Question about FDL50R1 Dehumidifier
...off 2 sides and back and inspect the float system, (same idea a toilet flush) when styrofoam float hits top, switch shuts off the compressor or ac or dehumidifier to prevent water spilling onto
Usually answered in minutes!
312 Questions
314 Questions
258 Questions
200 Questions
154 Questions