Questions & Answers for: danby dehumidifier p1

...Danby Service for further assistance. He had no documentation of a P2 code for my model. He also described other General Codes (applicable to most Dehumidifier/Humidifier models): E1 = Not enough ...

Danby Dehumidifier (Model DDR657EE), the unit may not turn on immediately when powered On (it may take a several minutes). So, generally, it would be normal in your case. 2) Danby's Consumer Help Line

...number: 419-425-8627. The receptionist transferred my call to their Service dept. My call was answered in 2 minutes. The Danby Service Rep. helped me with my question about my P1 code (for

...Danby Dehumidifier/Humidifier models): E1 = Not enough water E2 = Not draining E3 = Water temperature too cool E4 = Overflow Switch activated E6 / E7 = Problem with Temperature Sensor So, if you see ...

...Danby Service for further assistance. He had no documentation of a P2 code for my model. He also described other General Codes (applicable to most Dehumidifier/Humidifier models): E1 = Not enough ...

the P1 light is on , percentage of temps not showing any longer, it only blows air and does not collect humidity can you help? P1 is code for defrosting. Once it's done defrosting it should start ...

DDR4010E just bought and set up now a couple hours later the display reads:P1. what does that mean? P1 is code for defrosting. Once it's done defrosting it should start operating

Unit displaying p1 in the led window,and will not respond to keypad functions. P1 indicates that the unit is in defrost mode, ie it's too cold.

...danby dehumidifier less that 1 year ago and p1 is on most of the time. What can I do? According to your Owners Manual: P1 is part of a normal function of your dehumidifier. When your compressor is ...

...danby showing a P2 sorry it was a P1. P1- means the dehumidifier is in a defrost mode. This occurs when the temperature on the evaporator gets too cold and the unit shuts down to defrost (a defrost ...