Questions & Answers for: crank shaft sensor 2000 dodge

crank shaft sensor. where is it located on a crank shaft sensor. where is it located on a dodge 2000 durango? behind the engine on the top passenger side of the engine. 2 13mm. bolts.goes through the ...

one person telling me it is the crank shaft positioning sensor. Has not thrown any diagnostic codes. Any ideas on how to test brain or Crank shaft sensor? Any ideas Maybe check ignition control modual

position sensor location 2001 dodge 3500 van cam or crank position sensor location with the 5.9l 360 v8 motor. Crank sensor is in the bell housing of the transmission. Cam sensor is in the distributor

...engine light and code P1391 crank or cam position sensor The above can cause rough idle on the Dodge Ram 1500 5.2L V8 Engine. Can try to replace the sensor, but verify that the wires are ok

crank, I have changed the coil pack, cam position sensor,& the coil wire to the distributor, & still nothing.... I have no clue what else to change! Thank you all in advance!!!! well if ur not

...crank shaft postion sensor 5.2 v8 3.9L V-6 ,5.2L 5.9L V-8 the crankshaft sensor is located near passenger side rear of the cylinder head on the engine block. Behind the passenger side cylinder head ...

the Crank Sensor. Changed Alt. Changed Spark Plugs Changed Spark Plug Wires Changed Crank Shaft Sensor. Vehicle turns over, has fuel pressure and spark. have you checked the coil(s) or ignition module

...crank shaft positing sensor hookup in the wiring harness of a 94 dodge ram 360 crank shaft positing sensor hookup located in the wiring harness It is hard to get to - the sensor is at the back of the ...

...it will restart, run for days stops at low speeds ( is it a sensors , computer?? Some say cam or crank sensor know body knows ,all want sell new truck Change your crank sensor it's a common ...

...crank shaft position sensor on a (1998 dodge Dakota v8) I know it's not a 1998 dodge ram v8 but the motors should be similar, I hope this helped..........CHEERS.. ...