...pin numbers and a magnifying glass soldering iron .took me hours to follow the the connections in the fuse box separating the two halves to follow circuit,tracing wires back to ECU then following ...
Question about 1998 Escort
...RESET KEY TO CAR this is a dealer only repair,as the OBD II connector uses manufacturers pin that are not in a OBD II compliant connector that one can buy over the counter.older cars can be repaired ...
...reset this for me. I mean it only cost me $50.00 (NZ) probably about $40.00 (AU). It only took them 20 seconds to do so don't worry about it too much. The dude told me that an auto electrician could ...
...reset before the computer turns that injector back on. Check engine light on has to be tested and corected before injectors are condemended. They cost alot rebuilt ones are not likly to be very good ...
RESET ITSELF, TAKING 15 TO 30 SECONDS. I HAVE BEEN TOLD I NEED TO HAVE THE LCM REPLACED COSTING OVER $500.00 FOR JUST THE PART. THE MECHANIC STATED THAT WHEN HE CALLED THE DEALER THEY STATED THAT THEY
...reset it...when the wrench light is on it is very sluggish...I still have 2 1/2 years to pay on this vehicle and paid 3,300.00 for transmission repair...hoping this electrical/computer thing is not ...
reset." I've complained about this for two years, but it has gotten progressively worse Most likely issue is your accelerator position sensor. Recommed you remove it and test with an ohmmeter
...Pin#4 GY/RD (gray/red)), which should be 4.0V-5.5V with key ON. The acceptable voltage range from the FRP sensor to the car's computer is 4.0-5.5 volts. What the P0193 code is saying is that the ...
...reset. like seen on FORDS. its no ford. if the engine wont start (right>?) but cranks, great and fast.... and spark is good on all cylinders, not just one and is timed right. then it's a fuel ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions