Cannot run printer...stuck on Initializing when the printer comes on (hp psc 1610v all in one) it just keeps saying Initializing and stays that way. I have changed the usb, shut it down, reinstalled ...
Won't initialize make clicking sound when turned on. Won't initialize. Keeps clicking. You've stripped something out, its a mechanical problem. Probably on the bar that drives the print head. I ...
keeps wanting to initialize unable to use fax function My 'BROTHER DCP115c' printer unable to initiate (error 4f). Please can you solve itfor me? I went to a troubleshooting site and followed ...
HP PSC 2175 Initializing problem My printer keeps on shutting off. Why? Epson LQ-2070 Initializing problem
We changed the toner in our E Studio 3511 and now it keeps saying network initializing? Can you help? Hi how are you hope you are ell This is jack [email protected] Dear dont wary after some time ...
Question about LaserJet M1522nf Multifunction Printer (CC372A)
connected via usb to dell laptop. Printer will work well if I re-install it for less than 30 minutes. then it decides to re-initialize itself and then loses contact with the cpu. It keeps ...
...to initializing. tried to shut down and restart, i keep getting the same problem. Suggestions? Hi! Had the same thing with one of my clients and had to swap out the main controller board!!
Question about ImageClass MF6540 Copier
...keep saying initializing printer controlller and won't work When the machine is still in initialization state would mean of of the parameters is abnormal , paper jam, ink empty, faulty sensor, if not ...
Question about hp color laserjet cm1312nfi aio printer mifunction printers
cm1312 keeps on initializing keeps on initializing and cannot go to ready If under warranty call HP. The formattor board has failed, this can be a jet direct connection issue, but the jet direct board
Question about hp color laserjet cm1312nfi aio printer mifunction printers
...just won't go away when I turn on the printer it keep saying initializing". Dear Pl. check the ram module open clean the contact points with a dust free eraser. and reinstall
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions