Questions & Answers for: control timing module dodge dakota

...control module checked. To reset your engine codes: Remove the negative terminal of your battery (10mm wrench). Turn your ignition key to START and hold it there for about 15 seconds. Turn your ...

...control module, you may cause way more problems if you just started unhooking things... unfortunately, just like other computer related items in our lives, sometimes we just have no control. Sorry... ...

...but flashers work. started out the turn signals would flash several times then quit. now i have nothing. Either a multifunction switch, or a body control module problem. Possibly the flasher

What should the engine timing be for a 1998 Dodge Dakota 4 cylinder? non-adjustable. Taken care of by onboard computer (PCM) Powertrain control module.

Can not find ignition module on 89 dodge dakota v 6 There is none. You have everything in a the one fender mounted control unit The distributor is for injector timing,do not move it.

...timing is not adjustable. The distributors do NOT have centrifugal or vacuum advance. Instead, base ignition timing and its Powertrain Control Module (PCM) controls advance on each of these

even runs when switch is unpluged.what could be the problem sounds like a bad blower motor control module. go to any auto parts store for location of module, and more info if needed. have a good day !

...I set the timing on my 1996 Dodge Dakota sport 6 cylinder? Ignition timing is controlled by the power train control module. there is no adjustments you can do. do not try to rotate distributor.good ...

...Control Module) for a 1992 3.9 Liter V6 dodge dakota 4 speed transmission w/od? I bought this truck knowing that the computer in it was the incorrect part but it sufficed as the owner had installed ...

...timing belt /chain
cam/crank position sensors wot working
immobilizer inoperative
problem ignition control module
failed coil/s ECM fault
no fuel pressure ---faulty pressure ...