...p5q se/r, c2d E8500, 2x2g 800 RAM) takes over a minute to detect my IDE drive during boot up, and after looking around the net for some answers all I could come up with is "Ensure if the drive is on ...
Question about P5QC Motherboard - Intel P45, Socket 775, ATX, DDR3/DDR2, Audio, PCI Express 2.0, Gigabit LAN,
...Cable from another HDD and connect it straight to to the E Sata Enclosure and see if the Operating System picks it up,Make sure the HDD you removed is plugged back into the enclosure.If that doesn't ...
Question about P5QL-EM - Motherboard - micro ATX - iG43 - LGA775 Socket - UDMA133, Serial ATA-300, eSATA - Gig...
...cable connected to the motherboard as well. While inside your computer make sure you're aware of ESD. Bad hard disk drive If you have followed the above steps and you continue to experience the same ...
...a dual PATA cable to connect to the board. Make the one you'll use the most the Master and the other the Slave. And Bios and Windows will automatically setup the drive letters for you. Good Luck ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions
