...computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card: 1. Shut down the computer 2. Plug ...
...computer does not display anything and the monitor is testing good then the on-board video or video card might be faulty. You could change the video card if it has one or add one to the system if it ...
Question about Aspire m5640 PC Desktop
add devices (after turning the computer off) one at a time. If this doesn't work, then you are looking at replacing the motherboard or just the video card if that is possible. Restart the system. does
...add second monitor to asus cg5270? The Asus Essentio CG5270 is a desktop computer, so I see it was placed in the wrong category. No prob! Certain selected models of the Essentio CG5270 come with a ...
Question about ThinkCentre S50 8183 - P4 3 GHz (8183D9U) PC Desktop
...Computer has an add-in graphics card but the monitor cable is plugged into the integrated video connector You can enter BIOS when booting to make sure the on-chip video is disabled after you connect ...
Question about Rushmore (64 MB) Graphic Card
computer i have a DMS 59 -> VGA splitter on it with 2 monitors. i currently am workign with 3 monitors under a onboard card (1) + radeon 1950 (tyhe other 2) my bios settings are reading the PCI
...computer desk. It's kind of eerie your first time dragging the screen across. You will also find out why it is best to use two similar monitors, when using dual monitors. The pixel resolution is ...
...computer and the monitor (if not permanently connected to the monitor)? Are you connected to the active port? (You can add a video graphics card in most desktops. The motherboard video port usually ...
Question about ThinkCentre S50 8183 - P4 3 GHz (8183D9U) PC Desktop
computer has an add-in graphics card, but the monitor cable is plugged into the intergrated video connector Hi did u experience any problem with the issue that your have computer has an add-in ...
...add, is the Secondary monitor )Plug the computer into power. Both monitors plugged into power, turn them BOTH on.Turn the computer on.When Windows loads you will see a display on the Primary ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions