Questions & Answers for: command start problems gmc 6

Problems starting after short trips. My 2002 GMC Envoy has difficulty starting after short trips. After starting the car in the morning, driving 5-6 miles and stopping, the car has difficulty starting

command start not working I never had any problems with my command start before. I got my jimmy scanned last night and a code did come up which was manually reset by the guy who scanned my truck now i

...gmc jimmy? 4.3l, 6 cyl. -Drivers side starting at the front of engine: 1-3-5 -Passenger side starting at fornt of engine: 2-4-6 1-6-5-4-3-2 but that isn't the way they go on the cap. Put the wires on ...

This code indicates a problem with the fan clutch, the speed it is running is not the speed it was commanded to run/ The fan clutch assembly needs replacing

...over but wouldn't start. What's the problem? It's a 1996 GMC Savana a V 6. you need to determine if your missing spark at the plugs or fuel pressure is below 50psi first Seems to be a timing ...

...command start the vehicle won't start at all. Why does this happen?? Now vehicle won't start at all, and it's been three days, in the past this problem has resolved itself within a few hours. This is ...

...with the EVAP system vent valve solenoid circuit. The solenoid may not be reacting to computer commands to open or close. The solenoid and circuit would need to be

...GMC Sonoma 4.3. I was getting misfire code cyl # 4 when going up long steep hills along with lean codes, cat codes, o2 codes etc. With OE poppet injectors and 250K miles I thought it could need ...

...start, fuel pump turns on, no gas comes out. what could this issue be? See if you can spray fuel directly into the tbi and if it starts you have a fuel problem or a fuel filter plugged up. Fuel ...

...command start. Fuel pump running with key initially turned, but the armed lock is enabled.Hooked battery booster you have to reset the computer. 2 ways use your key to lock and unlock the door or use ...