Questions & Answers for: code h4 01

...by removing the fuser look at the switck on the bottom if the arms on the switch warp have to replace it. Ihave Sharp AR-C160. WHAT DOES THIS H4-01 ERRO CODE MEAN? How do I clear the error code

code of H4-01. How do I fix? Thanks. H4 error pertains to lamp errors. that would either be the copy lamp or the heater lamp. check both lamps. with heater lamps,it's usually caused by either a broken

I am getting code H4-01. What does this mean? I am getting code H4-01. What does this mean? H4 means you have a HEAT problem, most likely a bad fuser assy.

Code H4-01 Kod H4-01 The problem associated with this code is related to the fuser not heating up fast enough. H codes cannot be cleared by powering off and on the unit. A service call is required.

Sharp Copier AR-286 Error Code H4-01 Sharp Copier AR-286 Error Code H4-01 # * C* start 14 >1 Start you can remove this error by enter the sim14.

Erroe Code H4-01 Error Code H4-01 you must enter cod 14 then press copy key

Sharp AR-M237 Error code H4-01 Error code H4-01 means low temperature.

...code h4-00 In this post, you can see how to solve your problem with the H4-00 error code in the Sharp MX-M266n series MX-M316N, MX-M356N series. We provide several ways that you may have to cure ...

H4-01 is an error code that the fuser temperature is too low. This can be caused by a number of things, such as the copier wasn't given enough time to warm up, or the room was cold. You can reset this

CODE H4-01 COPIER HAS A SERVICE CALL CODE H4-01 it is a fuser malfunction!