...means the clock on the phone has not been set. You can try to set the clock using the Menu option on the handset, but the easier option is to simply call the phone from another number. When this ...
...phone - CID not working in India Hi All, I've bought a GE photo phone from US and it was working fine there. But in India Caller ID is not working properly. I mean when any incoming call comes, phone ...
What does New CID=1 mean? A message has appeared on my handset which says "New CID=1". What does it mean? Hello, CallerID. CID=1 mean there was one (new) caller ID number recorded by the telephone. ...
...is still plugged in the wall? If it is, then try using another line cord! If it's still not working, then try another phone in that phone jack. CID 25 just means you have 25 number in your Caller
...you would press the CID-S button that you set up to toggle to the opposite display while the phone is ringing or you're talking. It's section 9.3 of the maintenance tool or 904 in system commands. ...
...CID number to be able to unlock it You need to Unlock Your Phone from Vodafone Network Lock means You can use the Unlock code,what is Mobile Phone brand and model? you can get the Unlock code from ...
phone is the Avaya IP Office 5410. Thanks If the number matches the CID number, you should get the name as well. But here is the hard part. IF your system requires you to dial an access code (say 9 to
Question about 5400 Series 5410 Phone
Both our uniden phones are displaying New CID:28 and New CID:29 and we are neither receiving or can make calls??? What does this mean? page 26 of the user manual ( detc 6) problem --no handsets can ...
Question about 5400 Series 5410 Phone
...phone? For this landline telephone, you can switch a call from one handset to another (or the base) by using the Intercom feature. Press del/int on the handset or Int on the base and choose a handset ...
phone system idle (no calls in or out, no one using another handset), press Menu/Select. Use the Up(DIR)/Down(CID) arrows to navigate to Answering Sys. Press Menu/Select. Navigate to Ans Sys Setup and
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions
