Questions & Answers for: chevy upper plenum

Question about 1997 C/K 2500

1 Answer

fuel Where is the fuel regulator located at on chevy 350? If it's fuel injected, 96 up it will be under the upper plenum of the intake manifold mounted on the side of the injector spider.

Ad

...chevy pick up? at the top of the engine head beside rocker cover at the air intake side not the exhaust side. inside the upper plastic intake plenum. look up part on a parts site to c what they look ...

Ad

...chevy s-10 blazer with a 4.3 vortec and it acts like its stuck in flood mode. i replaced the fuel pressure regulator and its still flooding . i think it might be the spider, but there expensive so ...

Question about 2003 Suburban 1500

2 Answers

How many knock sensors are on a 2002 chevy suburban LT 1500 4WD? There are 2 Located Next to Each other There are 2 knock sensors in your vehicle.They are under the upper intake plenum.

upper plentium ok the best way to find out this is call the chevy dealer! you will need a special to called torque to angle guage! the gm engines no longer have finale torque numbers they go to angles

Question about 2000 Blazer

1 Answer

where is purge solenoid located on a 2000 chevy blazer 4x4? The Purge solenoid is located between the ICM (ignition control module) and the distributor on the plastic upper intake plenum.

Question about 1999 Silverado 1500

2 Answers

...chevy-silverado-yourself/ That year model should have Chevys Vortec engine as it's power plant. If so, the fuel pressure regulator is integrated into the fuel injector assembly inside the plastic ...

...chevy impala 3400 with a cracked plenum. I found literally the last one at the junk yard for $75 which is a huge relief because the dealer-only-item is $340. Thats great i bought the book and have a ...

Chevy Blazer with Vortec V6 engine? You have to reove the upper plenum. that is the part on top of the intake that looks like a dome on top of the lower intake.There is 8 10mm bolts around the outside

Question about 1998 Chevy K1500 Truck Upper Intake Manifold for V8 5.0L

1 Answer

...the flat surface on the front of the distributor with the back side of the upper plenum it will be very close.. Many of the distributors had the white line on the base of the distributor. good ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...